Winding and Packaging
Fisk developed layer-level winding over 40 years ago, in square and flat wire, while simultaneously perfecting the ability to impart a uniform cast and camber to the wire prior to winding it onto the spool. Next, we engineered one-piece plastic spools specifically for layer-level wound wire. Today, our largest reels (500kg) accommodate a prodigious amount of high-precision wire so our customers enjoy longer production runs without changing spools.
The packaging information presented is for the most common spools and reels. For other packaging availability, please contact our sales department.
Spool Specifications
Alloy Wire Packaging
| SPOOL TYPE | P/N | FLANGE DIAMETER |
TRAVERSE LENGTH |
ARBOR HOLE DIAMETER |
DRUM/BARREL DIAMETER |
TOTAL REEL WIDTH |
DRIVE HOLE DIAMETER |
ARBOR TO DRIVE DISTANCE |
NOMINAL CAPACITY (LBS) |
APPROXIMATE WEIGHT (LBS) |
| 30 x 11 Plastic | P30X11 | 30 | 11 | 5 | 16.25 | 14.5 | 1.5 | noteA | 1000 | 58.5 |
| 22 x 11 Plastic | P22X11 | 22 | 11 | 5 | 14 | 14 | n/a | noteA | 440 | 33 |
| 20 x 6 Plastic | P20X6 | 20 | 6 | 3.5 | 16.25 | 8 | n/a | noteB | 110 | 14.5 |
| 18 x 3.5 Plastic | P18X3.5 | 18 | 3.5 | 12 | 12.5 | 4.125 | n/a | noteB | 75 | 4 |
| 16 x 6 Plastic | P16X6 | 16 | 6 | 5 | 9.75 | 9 | n/a | noteB | 110 | 12 |
| 12 x 3.5 Plastic | P12X3.5 | 11.75 | 3.5 | 2 | 8.25 | 3.875 | 0.375 | 1.688 | 25 | 1.4 |
All dimensions are in inches. For other spool types, please contact our sales department.
A | Slot for 0.75” drive pin, located at 3.875 to 5.875” from arbor (center to center).
B | Open drive area from arbor to edge of spool.
Alloy Conductor Packaging
| SPOOL TYPE | P/N | FLANGE DIAMETER | TRAVERSE LENGTH | ARBOR HOLE DIAMETER |
DRUM/BARREL DIAMETER |
TOTAL REEL WIDTH |
DRIVE HOLE DIAMETER |
ARBOR TO DRIVE DISTANCE |
NOMINAL CAPACITY (LBS) |
APPROXIMATE WEIGHT (LBS) |
| 22 Inch Plastic | P22x11 | 22 | 11 | 5 | 14 | 14 | 0.75 | noteA | 375 | 33 |
| 16 Inch Plastic | P16x8x1 | 16 | 8 | 1.25 | 8.75 | 10.5 | 1.5 | 2.625 | 125 | 11.5 |
| 12 Inch Plastic | P12x7x1 | 11.875 | 7 | 1.25 | 6.5 | 8 | 1.25 | 2 | 50 | 2.8 |
| 8″ Plastic (3″) | P8x6 | 8 | 6 | 3 | 4.5 | 7.375 | 0.375 | 1.930 | 25 | 1.4 |
| 8″ Plastic (1.25″) | P8x6x1 | 8 | 6 | 1.25 | 4.5 | 7.375 | 0.375 | 1.930 | 25 | 1.6 |
| 6 Inch Plastic | P6x3.5x.625 | 6 | 3 | 0.625 | 3.5 | 4.25 | 0.75 | 0.937 | 8 | 0.65 |
| DIN 250 Plastic | DIN250 | 9.842 | 6.3 | 3B | 6.25 | 7.874 | 0.375 | 3.75 | 45 | 3 |
| DIN 200 Plastic | DIN200 | 7.874 | 6.3 | 0.866B | 5.315 | 7.874 | 0.5 | noteC | 25 | 1.6 |
| DIN 125 Plastic | DIN125 | 4.921 | 3.973 | 0.630B | 3.15 | 4.921 | 0.276 | 0.787D | 6 | 0.55 |
| 24C Bobbin | 24Carrier | 2.600 | 4.2 | 0.650 | 1.38 | 4.6 | n/a | n/a | 2.5 | 0.20 |
| 16C Bobbin | 16Carrier | 2.600 | 2.84 | 0.650 | 1.38 | 3.25 | n/a | n/a | 1.5 | 0.14 |
All dimensions are in inches. For other spool types, please contact our sales department.
A | Slot for 0.75” drive pin, located at 3.375 to 4.875” from arbor (center to center).
B | Tapered arbor hole.
C | Drive holes located 1” and 1.25” from arbor (center to center).
D | Additional slot which can accommodate a 0.276” (7mm) drive pin, located 0.5” (11-13mm) from arbor (center to center).